HP LaserJet MFP M227FDW

[Purrenga01]

Printing a document 107 pgs from my laptop/ window PC to HP 227MFP FWD Do not connect by wireless 

[A4Apollo]

Hey there! @Purrenga01, Thanks for stopping by the HP Support Community!

Are you able to print using a USB cable?

Are you able to print from other devices?

Have you replaced the router recently?

Are the printer and computer connected to the same wireless network?

Try the steps recommended below.

Restart computer, router and printer together to connect them back to the network.

Download and run print and scan doctor on the PC.

Refer this article to know more information about using HP print and scan doctor. Click Here

Connect the printer to your network

Use the Wireless Setup Wizard to establish a wireless connection between your printer and network.

1. From the home screen of your printer control panel, touch the Wireless icon .

2. Touch the Setup icon .

3. Touch Restore Network Defaults or Restore Network Settings, and then touch Yes to confirm your selection.

4. After the default network settings are restored, touch the back arrow, touch Wireless Settings, and then touch Wireless Setup Wizard.

   The printer searches for available networks.

5. Touch the name of your wireless network.

6. If your wireless network does not display in the list of wireless networks, touch Enter New Network Name, and then type the name of your wireless network.

Also, I'd suggest you assign a manual IP address and also disable the IPv6 on the printer. Here are the steps:

•    Obtain the IP address of the printer – You can touch the “wireless” icon on the printer control panel to get the IP address.
•    Type the IP address on your web browser to obtain the printer EWS page on your computer.
•    Go to "Network" tab - General - Select "Network protocols" - Select "Enable IPv4 only" (or similar) - Apply the settings.
•    Go to the “Network” tab – Click on “Wireless (802.11) – Then click on “Network address (IPv4)
•    Click on the radio button which says “Manual IP” and then click “Suggest a manual IP address” to give a manual IP address to your printer.
•    Click on radio button which says “Manual DNS Server” and under manual preferred type 8.8.8.8 and under manual alternate type 8.8.4.4 (This is Google DNS server address)

Lastly, if nothing works try restoring the printer network settings to default and connect the printer back to the network again using wireless setup wizard.

1. Touchscreen control panels: From the Home screen on the printer control panel, swipe until the Setup
menu displays. Touch the Setup icon to open the menu.
2. Open the following menus:
● Service
● Restore Defaults
3. Touch or press the OK button.
The printer automatically restarts.

Refer this article to further troubleshoot wireless connection issues with the printer. Click Here

Let me know if this helps!

Have a great day ahead! 🙂

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!