HP LaserJet Pro MFP M225-M226

[fedo]

my HP LaserJet Pro MFP M225-M226 printing  in both side of the paper all the time, 

i have a network and all the network users  printed as bothside of the paper , i need solution to print coppies  without bothside , 

thank you 

[dansdaduk]

I have a vague recollection that some drivers:

• Include the requisite 'set duplex' control sequence in the generated print job when the user selects duplex for a print;
• Do not include the requisite 'set simplex' control sequence in the generated print job when the user selects simplex for a print;
• Hence the 'simplex' jobs do not override the printer's own default simplex or duplex setting; if this default is set to duplex, the job will print on both sides.

What you should be able to do is change the printers default from duplex to simplex.

Easiest way to do this will probably be via the Embedded Web Server interface: on the System tab, select the Paper Setup page, and change the Duplex setting from On to Off.

[fedo]

@Distinguished Professor:

thank you for reply , but how can i found the webserver for my printer to make this change

[dansdaduk · Accepted solution]

I think that all of the LaserJet Pro M225 and M226 printer models are network-enabled (i.e. have ethernet and optional wireless connection).

Just point a browser at the TCP/IP address of the printer and look for the appropriate configuration page.

[fedo]

@Distinguished Professor : 
many thanks , worked fine  ,