HP OFFICE 91203 series scanning function not working on HPsmart app

[saikoq]

I try to use the printer scan function either on my phone or my laptop in Hp smart app , but it says feature unavailable. This feature is not supported by current printer. Why?

And also i connect my printer onto local wifi, when i select print document directly it does not work, neither uploading the document and select printing from the Hp smart app. I had the exact same printer in another place, and i set up the exact same way, everything was perfectly fine. 

[Nal_NR]

Hi @saikoq,

Welcome to the HP Support Community. 

I'd be glad to help you! 

I understand that you are having issues with the scan issue.

Perform the following tasks in the order given. Use the printer after each task to see if the issue is resolved.

Restart devices

• Restart your computer or mobile device and the printer to clear any error states. If you are using a network printer, restart the router.
• If your printer connects to a Wi-Fi network, disconnect your computer or mobile device from the network name (SSID), and then reconnect it to the same network name your printer is connected to.
• If the printer is available and has a ready status, the issue is resolved. You do not need to continue troubleshooting.
• Press the power button to turn off the printer. If the printer does not turn off, disconnect the power cord from the printer and from the power source.
• Turn off the computer or mobile device that you are attempting to print from.
• If the printer was set up on a network wirelessly or with an Ethernet cable, restart the router.
• If necessary, reconnect the power cord to the printer and to a wall outlet, and then turn on the printer.

Note: HP recommends plugging the printer directly into a wall outlet.

• Turn on the computer or mobile device.
• If the printer connects to a network, check the connection to make sure the same network is used by the printer and the device.
• Computer or mobile device: Open the list of available networks and make sure it is connected to the correct network.
• Printer: Check the Wireless light on the control panel. If it is solid blue, the printer is connected.

Click here for the remaining steps. 

Update the firmware if available on your current OS. Click here

Hope this helps! Keep me posted for further assistance

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.