-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Setup, Software & Drivers
- Re: HP Smart Controls unreadable

Create an account on the HP Community to personalize your profile and ask a question
08-26-2019 05:52 AM
After a windows update the controls in the software HP Smart became just rectangles, the words and icons are blank. I have reinstalled the software with the same result. What is the fix? the software is unusable as it is.
08-28-2019 10:37 AM
I suggest you uninstall the Software run the SFC Scan to fix any Windows issue and then reinstall the HP Smart App
You can refer to this Link: https://support.microsoft.com/en-in/help/4026529/windows-10-using-system-file-checker for help with the SFC scan
If the issue persists please create a new User Account with Admin rights and check if the HP Smart App works in the new Profile
Keep me posted how it goes 😊
If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar issue.
KrazyToad
I Am An HP Employee
08-28-2019 02:29 PM
I not only uninstalled, I physically removed the directories HP left on the system.
Then I did a reboot to clear out any remnants of the program that might have been in memory.
Went to the HP site and installed the drivers and software (HP Printer Assistant).
On running the install the software could not connect to the printer except by IP address but that was no issue to me.
On running the software it found several issues that it reported as fixed.
Printing and scanning works fine using the HP Printer Assistant.
Now I reinstall HP Smart: Same as before, works fine but can't read any controls. they still show up as blank rectangles.
(I know it works because I have HP Smart on another Windows 10 PC and it is fine there.
I used the good one to know what to click on the bad one. 🙂
Since I have a way to scan and print with the assistant I am writing off HP Smart as HP Dumb for the time being.
Thanks for the suggestions (Sincerely), I may try them at some point when I have a few hours to spare.
08-29-2019 12:28 PM
Thank you for the detailed response. Try creating a new user account on the PC in your leisure time as stated in the above post and check if the issue persists.
Keep me posted for further assistance.
KUMAR0307
I am an HP Employee