HP laserjet M140we , can not finish setup. Error Code: OW_4XX_OWSWS00001

[Computer2024]

Desr,

HP Laserjet M140we, can not finish setup. Error Code: OW_4XX_OWSWS00001

Please any hepl

[Sneha_01]

Hi @Computer2024,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

The error code OW_4XX_OWSWS00001 on your HP LaserJet M140we indicates an issue with the setup process, often related to network connectivity or software. Here are steps to troubleshoot and resolve the issue:

1. Check Network Connection

• Wi-Fi Connection: Ensure that your printer is properly connected to your Wi-Fi network. If you’re using a wireless connection, double-check the network credentials.
• Wired Connection: If possible, try connecting the printer directly to your router using an Ethernet cable to rule out Wi-Fi issues.

2. Reset the Printer

• Power Cycle: Turn off the printer, unplug it from the power source, and wait for about 5 minutes. Plug it back in and turn it on.
• Network Reset: If the printer allows, you can reset the network settings from the control panel.

3. Use the HP Smart App

• Download the HP Smart App: If you haven't already, download the HP Smart app on your computer or mobile device.
• Add Printer: Open the app and try adding the printer again. The app often provides guided setup and troubleshooting options.

4. Update Printer Firmware

• Check for any firmware updates via the HP Smart app or the HP support website. Firmware updates can fix bugs and improve connectivity.

5. Install Full Software

• Visit the HP support website and download the full software package for your LaserJet M140we. Sometimes using the full software instead of a basic driver helps with setup issues.

6. Check for Software Conflicts

• Ensure that no other printer software or drivers are interfering with the installation. If you have other HP software installed, consider uninstalling it and then retrying the setup.

I hope this helps.

Take care and have a good day.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

Rachel571

HP Support