HP photosmart 7525 will not print when in aol. this started in June 2023.

[BarbK-117]

HP 7525 will not print when I'm in AOL. As soon as I click print it closes app.

[A_Gayathri]

Hi @BarbK-117,

Welcome to the HP Support Community

I understand you are facing an issue with your HP Photosmart 7525. Not to worry I will help you to get a resolution to resolve the issue.

Let's perform a power drain: 

• With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
• Remove USB cable, if present.
• Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
• Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
• Turn on the printer and wait till warm-up period finishes and the printer is idle

Update the printer firmware 

• Click here to download and install the latest printer firmware from your product
• Click here to know different methods of updating printer firmware.
• Before you can scan to email, you must configure your email with a local email client, such as the Windows Mail app, Microsoft Outlook, Mozilla Thunderbird, or Windows Live Mail. If you already have a local client configured on your computer or do not want to scan to email, skip to the next step.

Step 1: Clean uninstallation of Pre-installed HP drivers

1.  In Windows, search for and open Programs and features 
2.  Select your HP Printer 
3.  Select Uninstall 
4.  In Windows, search for and open Devices and printers 
5.  In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete’ or ‘Remove Device’ 
6.  Open up the run command with the “Windows key + R” key combo. 
7.  Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”) 
8.  Click on the “Drivers” tab 
9.  Look for HP Printer driver. If you see it Click on it and click Remove at the bottom 
10.  Select Ok 
11.  Select Apply and Ok on the Print Server Properties windows 
12.  Close Devices and Printers, restart the computer.
13.  

Step 2 Setup Scan to Email -

1.) Click Start, and then click Programs.

2.) Click HP, click the name of the printer, and then click Scan to Email Wizard.

3.) In the Outgoing Email Profiles dialog, click the New button. The Scan to Email Setup dialog opens.

4.) On the 1. Start page, enter the sender's email address in the Email Address field.

5.) In the Display Name field, enter the sender's name. This is the name that will display on the printer control panel.

6.) To require a PIN to be entered on the printer control panel before the printer can send an email, enter a 4-digit PIN in the Security PIN field, and then re-enter the PIN in the Confirm Security PIN field, and then click Next.

7.) On the 2. Authenticate page, enter the SMTP Server and Port Number.

8.) If you are using Google™ **bleep** for email service, select the Always use secure connection (SSL/TLS) check box.

9.) Select the Maximum Size of Email from the drop-down menu.

10.) If the SMTP server requires authentication to send an email, select the Email Log-in Authentication check box, and then enter the User ID and Password, and then click Next.

11.) On the 3. Configure page, to automatically copy the sender on email messages sent from the profile, select Include sender in all email messages sent out successfully from the printer, and then click Next.

12.) On the 4. Finish page, review the information and verify all the settings are correct. If there is an error, click the Back button to correct the error. If the settings are correct, click the Save and Test button to test the configuration.

13.) When the Congratulations message displays, click Finish to complete the configuration.

Step 3 Scan to Email - 

1.) Load the document on the scanner glass according to the indicators on the printer.

2.) From the Home screen on the printer control panel, touch the Scan icon .

3.) Touch Scan to E-mail.

4.) Touch Send an E-mail.

5.) Select the From address that you want to use. This is also known as an "outgoing email profile."

6.) Touch the To button and select the address or group to which you want to send the file. Touch the Done button when finished.

7.) Touch the Subject button to add a Subject line.

8.) Touch the Next button.

The scan settings will display on the printer control panel screen.

9.) To change any of the scan settings, touch the Settings button, and then select the desired settings.

After selecting the desired settings, continue to the next step.

10.) Touch the Scan button to start the scan job.

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!