HP1102 Firmware and Config

[RangerZ]

I'm 2 days into trying to install 1102 drivers on a clean Win 10 Pro install on an Elitebook 840G1. 

It took disabling the 2 smart install options in the System Settings menu of the EWS to keep the Smart Install panel from opening in Windows 10.  The trick here was I had to have the printer already configured as a wireless printer which I did on a Windows 7Pro client.  I used the hp_LJP1100_P1560_P1600_Full_Solution-v20120831-50157036_SMO.exe driver package.

One of the parameters is IO Timeout, but I am unable to find this documented any where.  What does it do?

So, I have 6 of these printers on different firmware and software versions.  The ones I have access to are on Firmware\Software

20091029\20091104

20130703\20110504

20130703\20091104

20100223\20100406

20180301\20120926

Most have both Sleep and AutoOff.  20100223 does not have sleep, Comments or the WebServices Tab (maybe a good thing).  What is sleep doing (yeah, it's a lo power state, what else?)?

[RangerZ]

Just opened up all the driver packages in the above SW packages and they are as follows

20130703\20110504 04/02/2011,5.0.1.35248
20130703\20091104 10/23/2009,2.0.1.12659
20100223\20100406 03/04/2010,3.0.1.17829
20180301\20120926 08/31/2012,5.0.1.57036

The full package on the website contains the same drivers as 20120926

LJP1100_P1560_P1600_Full_Solution 08/31/2012,5.0.1.57036