How do I change the IP # on my printer to match my wifi IP address

[LKarno]

how do I change my printer IP number to match my wifi IP address. I have changed it but it not show submitted or ok or next

[KrazyToad]

@LKarno

Welcome to HP Community

I have gone through your Post and would like to help

Try assigning a Manual IP Address in the EWS Page

1) Obtain the IP address of the printer – You can touch the “wireless” icon on the printer control panel to obtain the IP address or print a Network Configuration Page
2) Type the IP address on your web browser to obtain the printer EWS page on your computer.
3) Go to "Network" tab - General - Select "Network protocols" - Select "Enable IPv4 only" (or similar) - Apply the settings.
4) Go to the “Network” tab – Click on “Wireless (802.11) – Then click on “Network address (IPv4)
5) Click Manual IP
6) If you see a Suggest a Manual IP Address button, click Manual IP address, and the Manual IP addresses are automatically filled out for you.
7) If your page does not have a button to suggest a manual IP address, type the IP address, subnet mask, and default gateway using the numbers shown in the report you printed.

Thank you

If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar issue.