How do I set up a 8025e to a new iMac via USB. No wifi.

[Margaret81]

How do I set up a 8025e to a new iMac via USB. No wifi.

[Jay_G24]

Hi @Margaret81,

I'd like to help!

Try the below suggestions -

Step 1: Prepare for the printer setup

Check requirements to prepare for the USB-connection setup and driver installation.

1. Confirm the following requirements and items before you begin:

   • The printer is turned on and in a ready state.

   • Obtain a USB cable less than 3 m (9 ft 10 in) in length.

   • There is an available USB port on your computer: If you connect through a USB hub or docking station, the printer might not receive enough power to properly operate.

2. Disconnect the printer USB cable from the computer. Do not reconnect the cable until prompted during the driver installation step.

Step 2: Install the driver and set up the connection

Depending on your printer and operating system version, a full feature driver or the HP Easy Start guided installation app is available to download.

1. Go to 123.hp.com, enter your printer model, and then click Begin. Depending on your printer and operating system version, the guided driver installation app HP Easy Start downloads, or you are redirected to the HP Software and Driver Downloads page to install the full feature driver.

   NOTE: 

   When the Install screen displays, make sure HP Scan or HP Easy Scan is selected if your printer has a scanner to enable full scan functionality.

   • If HP Easy Start downloads, follow the on-screen instructions to setup and install your printer. You do not need to complete the remaining steps in this section if the setup is successful.

   • If Easy Start fails or your printer is not listed on 123.hp.com, continue with these steps to install a driver from the HP website.

2. Go to HP Software and Driver Downloads, enter your printer model, if prompted, and then confirm the operating system version is correct.

3. Under Driver-Product Installation Software, click Download next to HP Easy Start or the full feature driver, depending on the option that displays, and then open the HP Easy Start file or the HP .dmg file in the Downloads folder or browser bar to begin the installation.

4. If you are prompted for a printer connection type, select USB.

5. On the Install screen, make sure HP Scan or HP Easy Scan is selected if your printer has a scanner to enable full scan functionality.

6. If you are prompted to add the printer to the printer queue, click the name of your printer, click the Use or Print Using menu, select the name of your printer in the pop-up menu, and then click Add.

   NOTE: 

   Selecting a different driver from the Use menu can result in limited printer functionality.

   

7. Return to the HP installer to complete the installation.

8. Try to print, scan, or fax, depending on your printer functionality.

Hope this helps! Keep me posted. 

And, Welcome to the HP Support Community. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping