I can not install my HP envy ispire 7200e series

[rakd70]

cant install

[zoey7886]

@rakd70, Welcome to the HP Support Community!  

Thanks for reaching out about your query regarding HP ENVY Inspire 7200e Series - First Time Setup Instructions! 

We're thrilled to have the opportunity to assist you and provide a solution.  

To properly unbox and set up your HP ENVY Inspire 7200e series printer, follow these step-by-step instructions.

Remove the Printer from the Box

The printer should be unboxed and set up on a clear, level surface with easy access to a power outlet.

1. Set the box on its side and remove the printer and all other materials from the box.
2. Remove all tape from the outside of the printer.
3. Open the front door.
4. Lift the cartridge access door.
5. Remove the cardboard from the print area.
6. Lower the cartridge access door.
7. Close the front door.
8. Open the main tray.
9. Remove all tape and cardboard from the paper tray.
10. Close the main tray.
11. Recycle the box and packaging materials. Go to www.hp.com/recycle to learn more.

Connect the Power Cord and Set Your Preferences

1. Connect the power cord to the back of the printer and into an electrical outlet.
2. If the printer does not turn on automatically, press the Power button.
3. On the printer control panel, touch your preferred language, and then touch Confirm.
4. Touch your country/region, and then touch Confirm.

  

Hope this helps! 

Take care, and have an amazing day!  

Did we resolve the issue? If yes, Please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!  

Regards,