-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Setup, Software & Drivers
- Laserjet Pro 200 MFP M276nw control panel not working
![Sign in](/html/assets/sign-in-banner.png)
Create an account on the HP Community to personalize your profile and ask a question
11-09-2023 06:15 PM
The control panel on HP LaserJet Pro 200 color MFP M276nw doesn't work in the screen part. The black perimeter works, but not the color part where the Copy, Fax,Scan... icons are. It stuck at the language selection. Can't scroll down to select.
11-11-2023 10:55 PM
Try to do a hard reset to see if it works.
11-14-2023 08:41 PM - edited 11-14-2023 08:51 PM
Hello. Thanks for the suggestions. I did the hard reset and found the problem still not resolved. The screen stuck at the language selection and stopped working (meaning I couldn't select the language choice).
I've also updated the firmware.
11-16-2023 02:03 AM
You may have a broken formatter......
The last try that i can think of before replacing a good one is to try to resend firmware through USB port -> must be it.
Power off M276
Open the right cover then you can see the formatter there.
Find two pins (middle right i think) ,use a clip or anything to short them.
Power on ,plug in USB line
You should see resend firmware or firmware download or anything like that.
Resend firmware and waiting for its ended and you should see percentage changed on lcd screen....
If you can't see percentage changed on lcd screen then you need to change usb connected port in the printer properties from usb001 to usb002 or ...003 and so on and don't forget press apply.
Hope it works.
https://www.youtube.com/watch?v=oFrTZGyFy4A
https://www.youtube.com/watch?v=UcNm9qyVdHc
Didn't find what you were looking for? Ask the community