-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Setup, Software & Drivers
- MFP M283wn - Want to disable energy mode

Create an account on the HP Community to personalize your profile and ask a question
08-21-2024 03:30 AM
I would like to request assistance in disabling the energy mode on the MFP M283. Any help in this matter would be greatly appreciated.
Solved! Go to Solution.
Accepted Solutions
10-08-2024 07:40 AM
thanks, friends, printer is fixed by format disk & upgrade to new firmware
08-21-2024 09:47 AM
I think you want to disable sleep. Is this because when your printer wakes up it gets a different IP address?
The printer is waking up from sleep and getting a different IP address than it had and your PC cannot communicate with it anymore. A quick fix is to set the sleep to off or never. Access the printers embedded web page and set sleep to off or never.
|
If the printer keeps changing its IP address then a change to the modem is necessary. The printer needs to be assigned a fixed IP address that is reserved and does not change. This is necessary on flex networks (multiple Wi-Fi booster / repeaters)
Assigning a fixed or reserved IP address is done in the modem as part of DHCP configuration.
First get a network report from the printer so you know its IP address or Mac address
Log into the modem and look for the DHCP server. Find the IP or Mac address of the printer and make it a fixed IP address.
LaserJet Reference
Thank you for using HP products and posting to the community.
I am a community volunteer and do not work for HP. If you find
this post useful click the Yes button. If I helped solve your
problem please mark this as a solution so others can find it