• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about printers, Click here to check it out!
Check some of the most frequent questions about Instant Ink: HP INSTANT INK, HP+ PLANS: INK AND TONER.


Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs AND MORE.
HP Recommended
Deskjet 2652
Microsoft Windows 10 (64-bit)

It seems that to have USB cable printing I have to undo the successful set up of wireless printing and go back to scratch.  Surely not!  I don't want to wreck my successful wireless install.

 

Could it be that my old cable is not capable of "plug and play"?  Printer set up used to be easy.   It's unbelievably complex now.

1 REPLY 1
HP Recommended

@Helen133

Welcome to the HP Community.

 

I suggest you do a Hard Reset on the printer

 

(1) Turn the printer on, if it is not already on.

(2) Wait until the printer is idle and silent before you continue.

(3) With the printer turned on, disconnect the power cord from the rear of the printer.

(4) Unplug the power cord from the wall outlet.

(5) Wait at least 60 seconds.

(6) Plug the power cord back into the wall outlet.

NOTE: HP recommends connecting the printer power cord directly to the wall outlet.

(7) Reconnect the power cord to the rear of the printer.

(8) Turn on the printer, if it does not automatically turn on.

 

The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.

Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

 

Use HP Print and Scan Doctor to check connectivity

 

Download a special version of HP Print and Scan Doctor.

  1. Download HP Print and Scan Doctor.

  2. Run HPPSdr.exe from the download location on your computer.

  3. Once HP Print and Scan Doctor opens, click Start, and then select your printer.

    • If your printer is not in the list, turn it off and on and then click Retry.

    • If there is a connection problem, follow the instructions in HP Print and Scan Doctor.

  4. If a screen prompts you to turn on printer updates, click Yes.

  5. If a screen prompts you to make your printer the default printer, click Yes.

  6. Try to print.

Keep me posted, how it goes!

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Have a great day!

Cheers:)

Raj1788
I am an HP Employee 

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.