• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines

Featured blog article:

Check some of the most frequent questions about Instant Ink: HP INSTANT INK, HP+ PLANS: INK AND TONER.


Check out our Black or Color Ink Not Printing, Other Print Quality Issues info about: Print quality and Cartridge Issues.
HP Recommended
HP Smart Tank 7005 All-in-One
Microsoft Windows 11

I have attempted to set up a new 7005 ink tank printer. It cannot pass one of the initial set up steps (registering that the black ink tank is full).  The ink bottles are empty.

2 REPLIES 2
HP Recommended

Hi @davh1, welcome to the HP Support Community. Your Smart Tank 7005 cannot complete the first setup step, and it also cannot register the black ink tank as full with the empty bottles you bought. That points to a problem with the first-time ink charging step, not to HP Smart itself. The printer will not complete setup while it needs ink to prime before it can be used.

Please try these steps in this order:

1. Make sure the printer is on a stable surface, plugged directly into a wall socket, and not into an extension lead. Remove any tape or transport locks from the ink tank area.

2. Fill the black tank slowly using the correct black ink bottle for the HP Smart Tank 7005. Stop at the marker marked on the tank, close the cap firmly, and wait for the printer to detect and fill the tanks.

3. In HP Smart, tap Setup > Printer Setup to start the setup again. Do the whole process with the computer on the same Wi-Fi, as the guide says.

4. If the setup stalls again at the same black-ink step, write down the error code or the step name exactly as it appears, and tell us how much ink is in each tank.

5. If you can, print a test page with the printer's controls once setup has finished and HP Smart has confirmed that the printer is connected correctly.

For the full Smart Tank 7005 software, I did not find a verified model-specific driver page in this check, so start at HP's official printer driver search and enter Smart Tank 7005: https://support.hp.com/us-en/drivers/printers

Microsoft's printer troubleshooting may also help if the PC cannot see the printer after setup: https://support.microsoft.com/en-us/topic/fb830bff-7702-6349-33cd-9443fe987f73

Please reply with the exact step where setup stops, whether the ink level has changed in the tanks, and the firmware version shown on the printer information page.


I am proudly Mexican, a Computer Systems Engineer and an HP Community volunteer (not an HP employee).
Did this reply help? Click the "Yes" button below to say thanks.
Did it solve your problem? Please click "Accept as Solution" so others with the same issue can find it.
Please keep the conversation in the thread and never post personal data (serial number, email, phone or address).


HP Recommended

The proposed solution did not work.  The brand new printer turns out to be faulty and was returned to the supplier for a full refund.  There was two faults - the system failed to register a full ink tank; and, the printer head could move.  This was only established after spending time with a human HP tech support person on the phone .- once I managed to negotiate my way through the front end bot process which was incompetent!    

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.
-->