-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Printers
- Printer Setup, Software & Drivers
- OfficeJet 6700 Premium problem with printer or ink system
Create an account on the HP Community to personalize your profile and ask a question
10-19-2018 11:08 AM
There is an error that pops up saying "There is a problem with the printer or ink system." I have turned the printer off and on.
I looked on the forum I found a similar post with a firmware link, links are not working.
Printer was printing, it finished and suddenly stopped and showed message.
Any help will be appreciated.
10-21-2018 08:03 AM
Welcome to the HP Forums 🙂 I would like to take a moment and thank you for using this forum, it is a great place to find answers. For you to have the best experience on the HP forum, you could also visit our HP Forums Guide for First Time Here? Learn How to Post and More. I see from your post that you are getting an error message on your HP Officejet printer. Don't worry I'll be glad to help you.
To provide you with an accurate solution, I'll need a few more details:
Have you recently made any changes on the printer before the issue started?
Did it happen after a recent power surge or power outage?
Have you checked for any obstructions inside the printer?
Are you able to move the carriage freely?
Did you try to make a copy from the printer?
In the meantime, let's try these steps here:
Please make sure that the printer is connected directly to the wall outlet and not to the surge protector.
Remove all the ink cartridges and then try to perform a hard reset on the printer.
With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
Remove USB cable, if present.
Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.
Turn on the printer and wait till warm-up period finishes and the printer is idle.
Now insert the ink cartridges and then try to print a test page and check if it works.
You can also update the Firmware, you can directly update the printer firmware from the printer control panel or download the software from our HP support website,
If your printer connected wirelessly, make sure to temporary connect the device with USB and then follow the link to check for the latest firmware update if available for your printer, using this website. You might need a Windows PC to run the firmware.
For more details on how to update the printer firmware - HP Printers - Updating or Upgrading Printer Firmware
Please follow the steps suggested in the support document for - HP Officejet Printers - 'Missing or Failed Printhead' Error - Click here
Alternatively, you can follow the steps suggested in the support document for - HP Officejet Printers - 'Ink System Failure' Error Displays
Please let me know if this resolves the issue, or if you require further assistance!
Eagerly waiting for your response!
that said, If the information I've provided was helpful,
give us some reinforcement by clicking the solution and kudos buttons,
that'll help us and others see that we've got the answers!
Good Luck.
Jeet_Singh
I am an HP Employee