-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Setup, Software & Drivers
- Paper Jamming During "Printer Maintenance

Create an account on the HP Community to personalize your profile and ask a question
03-25-2019 03:55 PM
EVERY TIME MY HP OfficeJet Pro 6978 Goes Into "Printer Maintenance" Mode, It First Feeds One Blank Sheet Of Paper Through, And Then The Next Sheet of Paper ALWAYS Jams.
And After I Clear The Jam, And Hit "OK" It Will Jam Again.
So, I Have Resorted To Pulling Out The Supply Paper, When "Printer Maintenance" Begins, Or After The First Jam, Then Only Putting It Back When "Printer Maintenance" Is Complete.
Any Idea As To Why This Is Happening?
03-26-2019 06:43 PM - edited 03-26-2019 06:44 PM
Welcome to HP support community.
Perform a power reset
- Turn on the printer, if it is not already on.
- Wait until the printer is idle and silent before you continue.
- With the printer turned on, disconnect the power cord from the rear of the printer.
- Wait at least 30 seconds.
- Plug back the power cable straight to a wall outlet without any surge protector and printer.
- Turn on the printer.
Update the printer firmware
Refer this HP document for the steps to update the firmware:- Click here
Refer this HP document for more assistance:- Click here
Let me know how it goes.
To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.
Cheers.
Sandytechy20
I am an HP Employee