Printer Setup Incomplete - 6055e Printer

[SMC2507]

Why do i keep getting this error - Printer Setup Incomplete, Your HP+ Printer must be setup using the HP Smart App. Then it goes no where.  - 6055e Printer 

[A_Gayathri]

Hi @SMC2507,

Welcome to the HP Support Community

I understand you are facing an issue with your Printer Setup Incomplete - 6055e Printer. Not to worry I will help you to get a resolution to resolve the issue.

Let's perform a power drain: 

• With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
• Remove USB cable, if present.
• Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
• Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
• Turn on the printer and wait till the warm-up period finishes and the printer is idle

Update the printer firmware 

• Click here to download and install the latest printer firmware from your product
• Click here to know different methods of updating the printer firmware.

If the issue persists, then please follow the steps mentioned in this document:

click here and follow the troubleshooting steps  HP+ printers - Printer setup incomplete or 'Unable to register the printer to your account' error

I hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

[A_Gayathri]

Hi @SMC2507,

We haven’t heard from you, this post is in reference to the thread you created on your friendly neighborhood (HP Support Community).

I would like to know if the resolution we provided worked for you.

If you have any other queries, feel free to reply at any time, and thank you for being a valuable member of our HP Family.

If you would like to thank us for our efforts to help you, go to the public post & give us a virtual high-five by clicking the "Thumbs Up" icon below, followed by clicking on the "Accept as solution" on my public post.

Have a great day ahead!