Printer doesn't connect

[Juffry]

My printer is connected to the Wi-Fi network, but I can't add it during the setup phase using HP Smart app. The first picture shows the printer is connected, online and visible, but when I click on the icon I get the error message showed in the second picture.

Picture 1

Picture 2

[sandytechy20]

@Juffry

Welcome to the HP support community.

I understand that you are getting printer offline error, follow these steps to fix the issue.

Use HP Print and Scan Doctor to fix connectivity and printing issues.

Download HP Print and Scan Doctor.

1. Run HPPSdr.exe from the download location on your computer.

2. Once HP Print and Scan Doctor opens, click Start, and then select your printer.

   • If your printer is not in the list, turn it off and on, and then click Retry.

   • If there is a connection problem, follow the instructions in HP Print and Scan Doctor.

3. If a screen prompts you to turn on printer updates, click Yes.

4. If a screen prompts you to make your printer the default printer, click Yes.

5. Try to print.

Assign a manual IP address and that should fix the issue.

Find the printer IP address to assign it manually.

1. Load plain U.S. letter or A4 paper in the input tray.
2. On the printer control panel, swipe down to open the Dashboard, and then touch the Setup icon .
3. Swipe up on the display, and then touch Reports.
4. Touch Network Configuration Page to print the page, which can be up to four pages long.

Setting a Static IP Address

Once you know your printer’s IP address from the page you printed, entering it is pretty easy. Here’s what you do:

1. Run your Web browser.
2. In the Web browser’s address bar, type the IP address of your printer and press Enter. Assuming you entered the right address, the HP printer control panel should appear.
3. Click the Networking tab.
4. Under Connections, click Wireless.
5. Under IP Address Configuration, click Manual IP.
6. Enter the IP address, subnet mask, and default gateway in the appropriate boxes.
7. Click Apply.

You can refer to this HP document for more assistance:- Click here

Let me know how it goes.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.