Printer won't initialize

[midwestuser]

The printer won't initialize beyond the second circle. The power button does not respond.

[sandytechy20]

@midwestuser

Welcome to the HP support community.

Perform a power reset

1. Turn on the printer, if it is not already on.
2. Wait until the printer is idle and silent before you continue.
3. With the printer turned on, disconnect the power cord from the rear of the printer.
4. Wait at least 30 seconds.
5. Plug back the power cable straight to a wall outlet and printer without any surge protector.
6. Turn on the printer.

Update the printer firmware

Here are the steps:- Click here

Let me know how it goes.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

[midwestuser]

Hi Sandy,

The updater can't find the printer even when I have it connected to my computer.  The printer won't initialize beyond the 2nd dot.

[sandytechy20]

@midwestuser

I am sending you a private message with the steps to reset the printer. Please check the mailbox icon at the top-right corner of this screen.

I hope this helps resolve this issue completely.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.