USB adaptor for connecting old printer with new computer?

[RJ198]

I currently have an old HP ENVY Photo 7155 All-in-One Printer connected by wire to my old computer. I would like to be able to connect it to a new computer via USB cable. Is there an adaptor available that would make this possible?

[Repairatrooper]

This printer has a usb port on it, you only need to purchase a standard a-b usb device cable like this one

https://www.amazon.ca/AmazonBasics-USB-2-0-Cable-Male/dp/B00BCWALHM/ref=sr_1_1_ffob_sspa?crid=1SUL91...

[RJ198]

Dear Repairatrooper,

Thank you for so kindly responding to my question. However, I do not see a usb port anywhere on my printer, only the power input and the input for the wired computer connection.

[ferRX]

HI @RJ198 

Sorry for entering in this conversation without previous notice, but I am here to help 😇

Check in the back connectors on the printer:

• 
• Envy Photo 7155 back connections.

Also check the USB cable to find where the USB cable connects to the back connector on printer.

• 

[RJ198]

Dear ferRX,

Thank you so much for this picture. In case, you and Repairatrooper have not already guessed, I am a "technologically challenged" senior. I did not realize that USB connectors come in different shapes.  I was looking for a port that was shaped like the USB ports on our home charging station for our phones. Sorry!

So, if I understand correctly now, you're saying that the more square-like end of the connector should fit where my current computer connector cable attaches to the printer. Right? 

[RJ198]

Dear Repairatrooper,

I'm sorry for being so confused despite your clear recommendation. I think ferRX may have straightened me out.  See continued conversation. Thank you for your kindness and patience.

[ferRX]

Hi @RJ198 

1. Don´t worry, we are here to help you 😇, we are users of HP printers and volunteers here.

2. Answering you question, yes you are right square like connector should fit into your printer and the other more flat-connector should go to your computer.

• 

3. Please check the next video to make it clear:

>> https://www.youtube.com/watch?v=vcaxgS3KTwg

* Click YES   to say thank you, 

* Click Accepted as Solution when question is answered.

Best regards,

ferRX.

dodecaedroh.gif