Want to override wireless and use usb cable connecting laptop to printer

[phdeephdee]

I connected my laptop with the printer using a USB cable and it worked fine. That was last week. Now it doesn't print and in settings it seems not to detect the printer anymore. What to do?  Thank you.

[Irfan_06]

Hi @phdeephdee,

Welcome to the HP Support Community.

Thank you for posting your query, I will be glad to assist you.

I understand you're experiencing an issue with printing via USB cable on your printer.

I apologize for any inconvenience this may have caused, I'm here to help you today.

Please follow the steps below to fix the issue.

A) Perform a power drain.

1) Take out the cartridges

2) Unplug the power cord from the printer & wall.

3) Press and hold the power button down for 15 seconds and release the power button, wait for about 30 seconds.

4) Plug the power cord back into the printer and wall, ensure the printer is plugged into the wall & not into a surge protector.

5) Insert the cartridges back into the printer.

Remove the cartridges > Unplug the power cord > Wait for 30 seconds > Plug the power cord back in > Insert the cartridges

B) Kindly refer to the steps on this link to update the printer firmware and let me know if that resolves the issue.

C) If the issue still persists, uninstall the printer software by following the steps from this link and restart the devices.

D) Install the printer software by clicking on the link again and let me know if that resolves the issue.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

I hope this helps.

Take care and have a good day

Irwin6

HP Support