hp printer error code ox83cooooa

[JMHazlett]

Was on windows 7 till the end date... printer suddenly stopped responding with error code "0x83c0000a nos_loader_app". I tried every fix I could find online, cartridges (which will NOT move) unplugging, etc. I was due to switch to Windows 10 so I did with no issues... have downloaded the driver for windows 10. Still have the same issue. PLEASE help

[Betty0610]

@JMHazlett

Welcome to the HP Support Community.

Let's try to reset the Printer here:

Turn the printer on, if it is not already on.

1. Wait until the printer is idle and silent before you continue.
2. With the printer turned on, disconnect the power cord from the rear of the printer.
3. Unplug the power cord from the wall outlet.
4. Wait at least 60 seconds.
5. Plug the power cord back into the wall outlet.
6. NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
7. Reconnect the power cord to the rear of the printer.
8. Turn on the printer, if it does not automatically turn on.
9. Wait until the printer is idle and silent before you proceed.

Also, try connecting the Printer to a different wall outlet directly.

Make sure the carriage path is not blocked.

1. With the printer on, disconnect the power cord from the rear of the printer.

2. If your printer has a battery, remove the battery.

3. Open the door to access the carriage inside of the printer.

   Examples of carriage access doors

   

4. Look in the carriage path for debris such as crumpled paper or dislodged labels, and then remove any that you find.

   Example of a printer with debris in the carriage path

   

5. If the carriage on your printer has a latch, make sure it is closed.

      CAUTION: 

   Ink tank printers: If the latch is closed, do not press down on it.

    

   

6. Use your hand to move the carriage to each side, making sure it moves freely. If the carriage is stalled or docked to one side of the printer and you cannot move it, continue with these steps.

7. Close the carriage access door.

8. Reconnect the power cord to the rear of the printer, and then turn the printer on.

Let's try a firmware update too: https://support.hp.com/in-en/document/c02919168

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

Thanks!

Have a great day!

[JMHazlett]

thanks for the response!

I have tried all of these things, more than once

but thank you

[Betty0610]

I recommend you to contact the HP Support Team regarding this as this could be a hardware issue.

Link: www.hp.com/contacthp/

Note:  Select the country accordingly to get the contact details for support.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

Thanks!

Have a great day!