lasejet pro mfp 128fn not install in window 10

[pihu2015]

i want to laserjet pro mfp 128fn  in window 10 64 bit . but driver is not available . pls provide me  

[Andr-1611]

@pihu2015 

1. download only: HP LaserJet Pro MFP M127/128 Series Full Software and Drivers 
   and read all infos!
2. download only: HP LaserJet Pro MFP M127/M128 Series Firmware Update 
   read all the information here too.

Here's what you need to do:

1. Uninstall HP printer software, and then remove the printer from your Devices list. 
   including HP Smart!
2. Restart the PC
3. Close all programs
4. Open up the run command with the "Windows Key + R" key combo > in folder Downloads double-click on the EXE,
   File name: LJPro_MFP_M127-M128_full_solution_23199.22.21.exe (125.8 MB)
5. The installation was completed successfully, now you must ...
6. Restart the System again
7. Now the installation is complete.

Document error messages accurately, even better is to take a screenshot of it and upload here.

And now install the firmware, see point 2).

File name: HP_M127_128_FW_Update_20230330.exe (13.5 MB)

Hope this helps.

Kind Regards
Andr-1611

If my post resolved your problem please mark this post as an "Accepted Solution".
Or click on the YES button to reply that the response was helpful and/or to say “Thank You”.