no set up cartridges

[emeline77]

Hello,

i don't have the set up cartridges to finish the configuration of my printer all in one 4122e.

Can someone help me, please?

Thanks

[Irfan_06]

Hi @emeline77,

Welcome to the HP Support Community.

Thank you for posting your query. I will be glad to assist you.

I see that you are facing an issue with your printer.

To understand the issue and help you, please share the details listed below:

- Exact model number/product number(SKU number) of your HP Product (Click here for information on how to find the model number/product number).

- Is this the first time you are setting up your printer?

- May I know which application you are using to print?

- When was the last time your printer was working fine?

- Were there any changes made to your printer recently?

- May I know which devices are you using to print eg: Windows PC, Mac, or Smartphone (Android or iPhone)?

Note: Do not share any of your personal information such as serial, phone number, email ID, etc.

Take care and have a great day ahead!

Irwin6

HP Support

[emeline77]

Hi Irwin6,

my printer is a HP Deskjet 4122e. The FPU No is 3XV13-64004. My PC is on Windows.

The problem is that I wanted to reinstall my printer but the application HP smart wants that I put SET UP cartridge. I don't have these cartriges any more because I have my printer since august 2022. 

Thank you if you can help me!

[Irfan_06]

Hi @emeline77,

Thank you for sharing the above information.

A) Please follow the steps below to perform a power drain.

1) Take out the cartridges

2) Unplug the power cord from the printer & wall.

3) Press and hold the power button down for 15 seconds and release the power button, wait for about 30 seconds.

4) Plug the power cord back into the printer and wall, ensure the printer is plugged into the wall & not into a surge protector.

5) Insert the cartridges back into the printer.

Remove the cartridges > Unplug the power cord > Wait for 30 seconds > Plug the power cord back in > Insert the cartridges

B) Kindly refer to the steps on this link to update the printer firmware and check if the issue is resolved.

C) If the issue still persists, uninstall the printer software by following the steps from this link and restart the devices.

D)  Install the printer software by clicking on the link again and let me know if that resolves the issue.

Note: Enable Bluetooth for an HP Smart app setup: Enable Bluetooth on your computer or mobile device so that HP Smart can detect the printer during the setup.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

I hope this helps.

Take care and have a good day

Irwin6

HP Support