officejet 3830 idle won't print...again!

[thisstinks]

printed a page 2 minutes ago and now printer is idle, won't print. happens often. tried scanning ...no computer found. all of a sudden. so frustrating.

[Jeet_singh]

@thisstinks,

Thanks for engaging in HP support Forums! This is a wonderful location to converse with the community, get assistance and find tips! I understand you are having issues related to the printer. Don't worry as I have a few suggestions which should help you resolve this issue.

Let's start off by performing a Hard reset on the printer, router, computer and other devices on the same network.

The following steps temporarily disconnect network and Internet connections and require restarting your computer. Complete any tasks or downloads in progress before continuing.

1. Press the Power button on the printer to turn it off.

2. Disconnect the power cord from the rear of the printer.

3. Disconnect the power cord from the wireless router.

4. Turn off the computer.

5. Wait for 30 seconds.

6. Reconnect the power cord to the wireless router.

7. Wait for 30 seconds, or until the router is fully on and ready

8. Turn the computer back on.

9. Wait for the computer to reload

10. Reconnect the power cord to the rear of the printer.

11. Turn the printer back on.

If the issue persists, I would suggest here is to Remove the printer and then try to add the printer. For more assistance, please follow these steps here: 

Confirm you are using AirPrint by adding the printer in System Preferences.

1. Click the Apple menu, click System Preferences, and then click Print & Scan or Printers & Scanners.

   Figure : Example of the Printers & Scanners window

   

2. Check if your printer name displays in the Printers list, and then do one of the following steps.

   • If your printer is listed, remove and re-add the printer to confirm it is set up for AirPrint. Click the printer name, click the minus sign to delete the printer, click the plus sign , click Add Printer or Scanner, click the printer name and then continue to the next step.

   • If your printer is not listed, click the plus sign, click Add Printer or Scanner, click the name of your printer, and then continue to the next step.

   • If your printer is not listed in the Add Printer or Scanner window, go to the Frequently asked questions in this document to resolve connection issues, try to add the printer again, and then continue to the next step.

3. Confirm AirPrint or Secure AirPrint displays in the Use or Print Using menu, and then click Add.

   Figure : AirPrint displays in the Use menu

   

4. Open a document or photo, click File, and then click Print.

If the issue persists, please try these steps here:

Is the printer connected to the network? Check the wireless light. If the light is steady blue, then the printer is connected to the network. If the light is flashing, then the printer is not connected to the network. Go to Setup - Network - Wireless setup wizard to connect the printer to the newtork.

Once the printer is connected to the network, then assign a static IP to the printer:

• Obtain the IP address of the printer – You can touch the “wireless” icon on the printer control panel to get the IP address.
• Type the IP address on your web browser to obtain the printer EWS page on your computer.
• Go to "Network" tab - General - Select "Network protocols" - Select "Enable IPv4 only" (or similar) - Apply the settings.
• Go to the “Network” tab – Click on “Wireless (802.11) – Then click on “Network address (IPv4)
• Click on the radio button which says “Manual IP” and then click “Suggest a manual IP address” to give a manual IP address to your printer.
• Click on radio button which says “Manual DNS Server” and under manual preferred type 8.8.8.8 and under manual alternate type 8.8.4.4 (This is Google DNS server address)

If the issue persists, Let's try to perform Reset Printing System in Mac:

• Click the Apple menu icon, and then click “System Preferences”.
• Click “Printers and Scanner” / “Print and Scan” or “Print and Fax”.
• Right-click the blank space in the Printers list, and then click “Reset printing system”.
• Click “Reset” in the confirmation window.
• Enter an administrator username and password, and then click “OK”.
• Wait until the printing system is reset and no devices show in the Printers list

• Restart your computer and then go back to System preferences – Printers and scanners.
• Click the “Add button” (+).
• Find, and then select the name of your printer from the printer list, and then click “Add” to add your printer.
• Click “Print Using...” or “Use”, and then select Secure AirPrint or AirPrint. 

Please let me know if this resolves the issue, or if you require further assistance!

Eagerly waiting for your response!

I hope you have a good day ahead,

And Feel free to ask your queries as this forum has some of the best people in the world available and ready to help.

Regards,