what does a solid red light mean on my 2700e printer

[Sewima]

My printer will scan; is connected to the internet and has a solid blue light for my wireless. when I try to print nothing happens and I have a red solid light on at the info button. Suggestions Please!

[Betty0610]

@Sewima

Welcome to the HP Support Community.

Are you using the HP Smart App on your PC? If not, you may try and install to see if that works: https://support.hp.com/in-en/document/c04675142. If yes, uninstall and reinstall it.

If the issue persists, try these steps:

Let's run the HP Print and Scan Doctor:

Use this link for details on using the HP Print and Scan doctor: https://hp.care/2JyaC93

If the issue still persists, let's do a root uninstall and reinstall of the software:

Unplug any USB cable, if any, before doing this.

1.) In Windows, search for and open Programs and features

2.) Select your HP Printer

3.) Select Uninstall

4.) In Windows, search for and open Devices and printers

5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose 'Delete' or 'Remove Device'

6.) Open up the run command with the "Windows key + R" key combo.

7.) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”)

8.) Click on the "Drivers" tab

9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom

10.) Select Ok

11.) Select Apply and Ok on the Print Server Properties windows

12.) Close Devices and Printers

13.)  Open up the run command with the "Windows key + R" key combo.

14.) Type c:/programdata and click Ok. Go to Hewlett Packard folder, remove any printer related folders & files.

15.) Restart the computer.

Once done, please download and install the software from here:

https://support.hp.com/in-en/drivers

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

Thanks!

Have a great day!

[Sewima]

I have completed your directions and nothing has changed. I can use the scan app but when I send a print order to the 2742e the printer icon comes on in my taskbar but it says there are no print requests. The HP Smart app says the printer is up and ready to print. It is connected to the internet and the wireless blue button is a solid blue. Its as if the print order gets lost somewhere.

Also, i can print from my laptop, and my android device but not this desktop. 

[Betty0610]

I would suggest you try the Windows built-in drivers. Follow the steps below:

•    Go to Control Panel - Devices and Printers - Click on "Add printer" and follow the on-screen instructions.

•    When the page prompts for the drivers, select "Windows update". The driver list will be updated.

•    Click HP, Hewlett Packard, or Hewlett-Packard in the Manufacturer pane, and then click the name of your printer in the Printers pane.

Refer to this document HP Printers - Installing and Using the Windows Built-in Print Driver for help.

Give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers and did reply to you!

Thanks!

Have a great day!

[Sewima]

Hi again,

I tried your suggestion and still cannot print to my 2742. As I said before, I can scan documents still. 

It seems strange because I have a Lazerjet 1020 from HP attached to the same computer  and it will print just fine. I have uninstalled the 1020 to see if there is a conflict but there was no difference. I tried installing the 2742 without the wifi settings and still no printing. Signed... confused!

[Betty0610]

Create a TCP IP port:

1. Print a Configuration Page to get the printer's IPv4 address (you can also tap on the wireless icon on the front panel of your Printer to get the IP address)

2. On your PC, go to Control Panel, from Devices and Printers, right-click the printer and left-click Printer Properties, select the Ports tab.

3. Click Add Port, select Standard TCP/IP Port, then select New Port and follow the wizard.

4. Type in the proper IP address for the printer.

This video resource will show you how to do it:

Create & Use TCP IP port

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

Thanks!

Have a great day!