• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about printers, Click here to check it out!
Common problems for Connectivity Issues
We would like to share some of the most frequently asked questions about Printer Wi-Fi, Connectivity Issues and Offline Status. Check out this link: HP printer is offline or unavailable.
HP Recommended
HP Officejet Pro 8610 e-All-in-One Printer
Microsoft Windows 11

Ran Troubleshooting software. I have two printers in the home and a laptop. None can connect. I have a wireless mesh in the home that has been working very well with the printer/scanner until today. Tried everything. Trying to connect the printer/scanner to my desktop, laptop or desktop2 over the wifi in the house. Nothing has worked. Any ideas.

2 REPLIES 2
HP Recommended

Hi @countrypreacher,

Welcome to the HP Support Community.
 

Thank you for posting your query. I will be glad to help you.

I understand you have trouble connecting the printer to a Wifi connection, Let's try to resolve the connectivity issues with your HP Officejet Pro 8610 e-All-in-One Printer. Here are some steps you can follow:

Please remove the Cartridges from the Printer if possible, and try a Hard Reset. Do keep us posted to help you better.
 

** Hard reset :
1. Turn the printer on, if it is not already on.
2. Wait until the printer is idle and silent before you continue.
3. With the printer turned on, disconnect the power cord from the rear of the printer.
4. Unplug the power cord from the wall outlet.
5. Wait at least 60 seconds.
6. Plug the power cord back into the wall outlet.
NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
7. Reconnect the power cord to the rear of the printer.
8. Turn on the printer, if it does not automatically turn on. The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
9. Wait until the warm-up period finishes and your printer is idle and silent before you proceed.
 

HP Smart App: Please uninstall the HP Smart app --> restart the Device, Wi-Fi router and printer --> install it back and add the printer.
 

Firmware Update: Please update the Firmware from the link. This will help with how to update the firmware on the printer or devices.

 

I hope this helps.

 

Take care and have a good day.

 

Please click “Accepted Solution” if you feel my post solved your issue, as it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

 

VikramTheGreat

HP Support

HP Recommended

Hi @countrypreacher,

I hope this message finds you well. I wanted to follow up on the technical issue that we discussed earlier and confirm that it has been successfully resolved.
 

If you encounter any further issues or have any additional questions, please do not hesitate to reach out to us. We are here to assist you and provide any necessary support.
 

I will be archiving this case for now, however, you can respond to the same thread to continue the conversation.
 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!
 

Take care and have a great day ahead!
 

VikramTheGreat

HP Support

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.