Can M110w printer print without internet connection? There is no wireless here.

[dany171]

Hi, I've bougth a new printer, It's a HP M110w laserjet.

I've no wifi, I've planned to use it connecting the usb cable to my pc,

It starts printing well but after few prints it print an error page sayng "Printer not connected to the internet" as also "The printer cannot print until it is connected to the internet " ... ecc.

How can I print?

Thanks.

Daniele.

[Anand_Andy]

Hi dany171@,

Welcome to the HP Support Community

I understand you are facing an issue with your HP LaserJet M110w Printer. Not to worry I will help you to get a resolution to resolve the issue.

Let's perform a power drain: 

• With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
• Remove USB cable, if present.
• Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
• Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
• Turn on the printer and wait till warm-up period finishes and the printer is idle

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

[PeterNovak]

You received an answer directly from It Crowd series. It would be funny if it was on TV.

I also bought the printer. To be printing without any kind of registration nor internet access for the printing app. It would not let me.  There is no such information written on the package nor on the sales pages where I bought it from. Misleading advertizing. I was so angry at these manipulating schemes by HP. But I found a loophole. You could air print from iPhone to the printer. I was not happy but it was ok. That worked for 3 months. Now the printer decided that it will not allow it anymore.

I MUST have a registration.

Is there anyway to make this a regular printer and print without any registration or internet access? Please do not tell me to check the cable! Or I should just return the printer and buy a different brand?

[Anand_Andy]

@PeterNovak,

Thank you for your response, I really appreciate your efforts. Yes you may use the printer with a USB connection and you don't have to register for it to work. 

Please follow the steps mentioned in this document: HP printer setup (USB cable)
 

If the issue still persists, I'm sending out a private message to assist you with the next course of action. 

Please check your Private message icon on the upper right corner of your HP Community profile Next, to your profile Name, you should see a little blue envelope, please click on it or simply click on this link.

Hope this helps! Keep me posted for further assistance.

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

[PeterNovak]

Thank you for the reply. There is no message in my inbox. Would you send it? Thank you.

My setup is Apple M1 and HP LaserJet m110we. Now connected by USB.

I already have Smart app installed. So I removed it. Disconnected usb. Restarted my mac. Reinstaled the app. It was a cloud download from app center.

I started the app, the printer was displayed already. It remembered it from prior instal. I reconnected the usb. The app thinks the printer is offline. Mac in the Settings says it is online and idle. The printer itself has a blinking exclamation mark and refuses to print anything besides the test page (but only by pressing a button, not from mac settings page). What do we do now?