Can’t connect

[11-13-05AIRR]

I can’t connect my printer 

[Alden4]

Hi @11-13-05AIRR,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

To help you connect your HP DeskJet 2752 All-in-One Printer, try the following steps depending on your preferred connection method.

Wireless (Wi-Fi) Setup

1. Ensure your printer is in Wi-Fi setup mode:
   • Turn on the printer, then press and hold the Wireless button (or Wireless and Cancel buttons) for 3 seconds until the Wireless light begins to blink. This puts the printer in setup mode.
2. Download and install HP Smart app:
   • On your computer or mobile device, download the HP Smart app from the HP website or the app store.
3. Open HP Smart and add the printer:
   • Open the app, select Add Printer, and follow the on-screen instructions. The app should detect your printer.
4. Connect to your Wi-Fi network:
   • When prompted, select your Wi-Fi network and enter your password. The printer should connect to the network.

USB Cable Connection

Connect the printer to your computer:

• Use a USB cable to connect the printer to your computer. The connection should be recognized automatically.

Install the printer driver:

• Go to the HP Support Page and download the necessary driver for the HP DeskJet 2752 printer if it doesn't install automatically.

Complete the installation:

• Follow any on-screen prompts to finish the setup.

Note:

• Restart your router and printer if the wireless connection is not working.
• Check the Wi-Fi signal and make sure your device and printer are on the same network.
• Reset network settings: Press the Wireless button and the Cancel button at the same time for 5 seconds. This will reset the network settings.

I hope this helps.

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Alden4

HP Support