DeskJet 2752 will not connect to wifi

[Cealexander]

I switched roiuters and upgraded service now my printer won't connect.stays flashing wifi til it powers down. aany ideals 

[Kumar0307]

@Cealexander, Welcome to the HP Support Community!

Let us follow these steps to connect the printer to the wireless network:

Use the Wi-Fi Protected Setup (WPS) button on your router to connect the printer to your wireless network.

1. Place the printer near the Wi-Fi router.

2. Make sure paper is loaded in the main tray, and then turn on the printer.

3. On the printer control panel, press and hold the Wireless button  for at least 5 seconds or until the light starts blinking. For Tango printers, press and hold the Wireless and Power buttons on the rear of the printer until the blue bar flashes.

4. Within two minutes, press and hold the WPS button  on the router until the connection process begins.

5. Wait for the light on the printer to stop blinking.

• Make sure the printer and the device you are using to print are connected to the same wireless network. Either 2.4 or 5GHz network.
• If you have a Dual-band router and both 2.4GHz and 5GHz networks share the same name/SSID, the printer will not be able to connect to the network. In this case, contact your Internet service provider to assign different names to both the networks.

For more info, you may refer to - HP printer setup (Chromebook)

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day!