-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Wireless, Networking & Internet
- Disable MAC address filtering on HP Photosmart D110 Printer

Create an account on the HP Community to personalize your profile and ask a question
08-26-2024 10:48 AM
Hi @Firebird7,
Welcome to The HP Support Community.
Thank you for posting your query, I will be glad to help you.
I understand you are trying to disable MAC address filtering on your HP Photosmart D110 printer, follow these steps:
Access the Printer's Web Interface:
- Ensure your printer is connected to the network.
- Open a web browser on your computer and enter the IP address of your printer in the address bar. (You can find the printer's IP address by printing a Network Configuration Page from the printer’s control panel.)
Log in to the Printer's Web Interface:
- You might be prompted for a username and password. If you haven’t changed these, the default username is usually "admin" and the password is either blank or "admin."
Navigate to Wireless Settings:
- Once logged in, look for a section related to wireless settings or network configuration.
Find MAC Address Filtering:
- Locate the MAC Address Filtering settings. This may be under advanced wireless settings or security settings.
Disable MAC Address Filtering:
- Change the MAC address filtering setting to “Disabled” or remove the printer’s MAC address from the list of allowed or blocked addresses.
Save Changes:
- Apply or save the changes to ensure they take effect.
Restart the Printer:
- It’s a good idea to restart your printer after making changes to ensure the new settings are properly applied.
Refer to this document: HP Photosmart e-All-in-One Printer series - D110 User manual
I hope this helps.
Take care and have a good day.
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution.
A_Gayathri
HP Support Community Administrator.