Embeded Web Server Password

[VIKRAMBM]

What is the default Administrator password for the printer to use Embeded Web Server or how to reset it

[VikramTheGreat]

Hi @VIKRAMBM,

Welcome to the HP Support Community.
 

Thank you for posting your query. I will be glad to help you.

To access the Embedded Web Server (EWS) for your HP Ink Tank Wireless 419 printer, the default Administrator password is typically "admin". If you need to reset the password, follow these steps:

1. Try Default Credentials

• Username: admin
• Password: Leave it blank or try admin

2️. Reset Printer Settings (Including Admin Password)

If the default credentials don’t work, reset the printer’s network settings:

1. Turn on the printer.
2. Press and hold the Wireless button (📶) and the Cancel (❌) button for 5 seconds.
3. The Wi-Fi light will blink, and the settings will reset.

💡 After this, try accessing EWS again with default credentials.

3️. Find Printer IP Address & Access EWS

If the password is still unknown, follow these steps:

1. Print a Network Configuration Page

• Press and hold the Wi-Fi (📶) button and Information (ℹ️) button for 3 seconds.
• The report will show the IP Address of the printer (e.g., 192.168.1.xxx).

1. Enter the IP Address in your web browser.
2. Go to Settings > Security > Administrator Settings and check or reset the password.

4️. Hard Reset

If none of the above works, try a full factory reset (this erases all settings):

1. Turn off the printer.
2. Press and hold the Power button.
3. While holding Power, press the Wi-Fi button (📶) 6 times and then the Cancel button (❌) 6 times.
4. Release the Power button.
5. The printer will restart and reset to factory settings.

After this, try logging into EWS again using the default credentials from Step 1.

I hope this helps.

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, as it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

VikramTheGreat

HP Support

[VikramTheGreat]

Hi @VIKRAMBM,

I hope this message finds you well. I wanted to follow up on the technical issue that we discussed earlier and confirm that it has been successfully resolved.
 

If you encounter any further issues or have any additional questions, please do not hesitate to reach out to us. We are here to assist you and provide any necessary support.
 

I will be archiving this case for now, however, you can respond to the same thread to continue the conversation.
 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!
 

Take care and have a great day ahead!
 

VikramTheGreat

HP Support

[VikramTheGreat]

Hi @VIKRAMBM,

We hope you’re doing great. We just want to send a follow-up message to check how things are and whether you still need our help. If you still do, we’re just a DM away.
 

Take care and have a good day.
 

VikramTheGreat

HP Support