HP ENVY 4500 Will no longer connect to printer

[Foam345]

will not connect to WIfi

[Nal_NR]

Hi @Foam345,

Welcome to the HP Support Community. 

I understand that you are facing connectivity issues. I’d like to help!

To provide you with an accurate solution, I'll need a few more details:

Make sure, your printer and your device are on the same network as 2.4GHZ only. 

What device are you using the printer with a Windows computer, Mac, Android, or iPhone?

Have you made any changes to your router network or software?

Meanwhile

Perform a power reset

1. Turn on the printer, if it is not already on.
2. Wait until the printer is idle and silent before you continue.
3. With the printer turned on, disconnect the power cord from the rear of the printer.
4. Wait at least 30 seconds.
5. Plug back the power cable straight to a wall outlet without any surge protector and printer.
6. Turn on the printer.

Restart the router and the printer.

If the issue persists, restore network settings to default settings.

1. Press the Wireless button to access the Wireless Status menu.

2. Press the button next to Settings to access the Wireless Settings menu.

3. Select Restore Defaults.

4. Confirm selection to restore defaults.

Run wireless setup wizard on the printer to connect the printer to wireless connection.

1. Press the Wireless button from the printer control panel, and then select Settings.

2. Scroll to select Wireless Setup Wizard, and then press OK.

3. Follow the on-screen instructions to set up the wireless connection.

Hope this helps! Keep me posted for further assistance.
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!