HP Officejet 6600 Printer will not connect to Linksys E9450 Routerr

[Austex2000]

My HP Officejet 6600 will not connect to my new Linksys Fiber Optics Router.  After many hours it just will not connect 😞

[Echo_Lake]

@Austex2000

Thank you for posting on the HP Support Community.
 

Don't worry as I'll be glad to help, to provide an accurate resolution, I need a few more details:

• What's the Wi-Fi light status on the Printer(Blinking or Steady)?
• Is your router dual-band enabled i.e., both 2.4GHz and 5GHz? If yes, make sure the dual-band has different SSIDs for 2.4G and 5G networks.

While you respond to that, let's prepare your printer for a wireless connection, and restart the printer, computer, and router. 

• Turn the printer off, and then wait 10 seconds.
• Disconnect the printer power cord from the printer.
• Turn off the computer or the device you are trying to print from.
• Connect the printer power cord to the printer, and then turn on the printer.
• Disconnect the power cord from your wireless router, and then wait 10 seconds.
• Reconnect the power cord to the router. Wait until Internet service is restored. Internet service is interrupted while the router is off.
• Turn on the computer.

This printer supports WPA encryption, check if the router is on the same encryption method. If using WEP or WPA-PSK+FT change it to WPA-PSK

Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!