How do I connect iPhone to my HP LaserJet 2540

[Ljlynn67]

How do I connect my iPhone to print wirelessly to my HP DeskJet 2540?

[Nal_NR]

Hi @Ljlynn67,

Welcome to the HP Support Community. 

I'd be happy to help you! 

Set up the printer network connection

1. Make sure the printer and your Apple device are connected to the same wireless network.
2. On your Apple device, make sure Wi-Fi is turned on and there is a checkmark next to the name of your local Wi-Fi network. If you are connected to a different network, tap the name of your network to join it.
3. Restart the printer, and then check the printer network connection status.
4. Printers with a touchscreen control panel: Touch the Wireless icon or open the Network Settings or Setup menu to view the network connection status.
5. Printers without a touchscreen control panel: Make sure the light next to the wireless icon or button is on and not blinking.
6. Place the printer within range of the Wi-Fi router signal, and then connect it to the network.
7. Printers with a touchscreen control panel: Open the Setup, Network, or Wireless settings menu, select Wireless Setup Wizard, and then follow the instructions to select the network name and enter the password.
8. Printers without a touchscreen control panel: Press and hold the Wireless button for five seconds or until the wireless light starts to flash. Within two minutes, press and hold the WPS (Wi-Fi Protected Setup) button on the router until the connection process begins. The printer wireless light stops flashing when the connection completes.
9. HP Deskjet 6000 and 6400, ENVY 6000 and 6400, and Tango printers: Press and hold the Wi-Fi button and the Power button on the back of the printer for five seconds until the blue bar flashes. Within two minutes, press and hold the WPS button on the router until the connection process begins. The blue bar stops flashing when the connection completes.

Click here for the remaining steps. 

Keep me posted for further assistance.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.