Hp SmartApp is not able to find printer

[Param123]

I am trying to setup the HP Smart App but it is not detecting  any printer in the network. I have tried all the troubleshooting step.

- My laptop and printer are on same wifi network.

- Network is setup on printer and when I open HP Smart portal in website, it shows printer is setup and active. No problem there.

- I am able to add  the printer through "printers and scanners" in mac os. Already tried resetting and deleting/adding the printer from there and no problem there. Also, I am able to print and scan from there.

- It is the only HP smart app which is not detecting printer whatever I try to do.

[A_Gayathri · Accepted solution]

Hi @Param123,

Welcome to the HP Support Community

I understand you are facing an HP smart app issue with your HP OfficeJet Pro 8028 All-In-One Printer. Not to worry I will help you to get a resolution to resolve the issue.

Let's perform a power drain: 

• With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
• Remove the USB cable, if present.
• Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
• Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
• Turn on the printer and wait till the warm-up period finishes and the printer is idle

Try the below suggestions-

1)Uninstall HP Smart 

2)Install all the available Windows updates

If it is been a while since you updated your Windows, that is the main reason why Windows says your HP printer driver is unavailable. Here are the steps on how to do a Windows Update to install all accessible operating system updates.

If you are accessing Windows 10, then these steps are for you.

1. Hit the Start menu and write an update. After that, click on the “Check for updates” option.
2. Tap on the “Check for updates” option.
3. After clicking on that option, Windows will install the updates automatically.
4. When Windows completes all its updates, start your computer again and attempt to print a file to check if your printer works.

3) Update the printer firmware 

• Click here to download and install the latest printer firmware from your product
• Click here to know different methods of updating the printer firmware.

4) Reinstall HP Smart from the Windows store

click here and HP printer setup (HP Smart app)

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!