I can’t connect my printer 2630 to the eero router

[Star1973]

I’m struggling to get my printer to print wirelessly I can’t seem to connect it to the eero router that I’ve been provided with. If anyone can help me connect it I’ll be grateful

[Rainbow23]

Hi @Star1973,

Welcome to HP Support Community. 

Thank you for posting your query. I will be glad to help you.

I see that you are facing issues with connecting your HP All-In-One Printer to your wi-fi network after changing the router.

Please follow the steps listed below to restore the printer to its network defaults and then reconnect it to the network.

Step 1: Restore the printer to its network defaults.
Press and hold the Wireless button and the Cancel button (X) from the printer control panel together for three seconds.

Step 2: Reconnect the Printer to the network:
1. Press and hold the wireless button on the printer for more than least three seconds to start the WPS Push Button method. 
2. Press the WPS button on your router.
NOTE: The product begins a timer for approximately two minutes while a wireless connection is established. If the printer connects successfully, the light next to the Wireless button glows steady blue.

You may also refer to this document.

I hope this helps.

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

[Rainbow23]

Hi @Star1973,

There is also an alternate way to connect to the new network by using the USB cable.

Please follow the steps listed in the document below to connect using USB cable and then change it to wireless.

Step 1: Connect using USB cable:

Please follow the steps in this document to connect the printer using the USB cable.

Step 2: Change from a USB connection to wireless:

Please follow the steps in this document to change from a USB connection to a wireless network.

I hope this helps.

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!