I constantly have a problem with my HP Envy 6452e going off line

[t58tina]

my envy 6452 printer constantly goes off line.

so each day I have to unplug, push the wi-fy button, and just do everything i can to get it back so that I can Print again.

does anyone have any suggestions that might help me?

[Kumar0307]

@t58tina, Welcome to the HP Support Community! I’m here to help.

I understand the printer goes offline. 

• Make sure the printer and the PC are connected to the same wireless network. Either 2.4 or 5GHz network.
• If you have a Dual-band router and both 2.4GHz and 5GHz networks share the same name/SSID, the printer will not be able to connect to the network. In this case, contact your Internet service provider to assign different names to both networks.

Install the printer using the TCP/IP port:

Check for any pending Windows updates first.

1. On the PC, go to Control panel > Devices and printers > Remove the existing printer entry > click on Add a printer(at the top) 
2. Under 'Choose a device or printer', click on 'The printer I want isn't listed'.
3. Select 'Add a printer using a TCP/IP address'
4. Find the IP address of the printer by tapping on the wireless/ethernet icon on the printer screen
5. Type in the 'IP address in Hostname or IP address' box, click next
6. Proceed to the next steps by following the on-screen instructions.
7. Try printing. Open File > print.

Hope this helps! Let me know how it goes. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click on the YES button to reply that the response was helpful and/or to say “Thank You”.

Have a great day!