cancel
Showing results for 
Search instead for 
Did you mean: 
Common problems for Connectivity Issues
We would like to share some of the most frequently asked questions about Printer Wi-Fi, Connectivity Issues and Offline Status. Check out this link: Printer Wi-Fi, Connectivity Issues and Offline Status..
New member
1 0 0 0
Message 1 of 2
48
Flag Post

I have changed my email address and wireless router. how do I change the details on my hp deskjet 2

HP Recommended
HP Deskjet 2600 series all in 1 printer

I have an existing HP deskjet 2600 all in one printer. However I have changed my internet supplier so have anew router and email address. Having trouble setting the printer to the new details, any help greatly appreciated.

1 REPLY 1
HP Support Agent
HP Support Agent
9,244 9,218 626 701
Message 2 of 2
Flag Post
HP Recommended

Hi @SamGriffiths1,

 

I'd like to help!

 

To assist better -

  1. I would like to know, is your router set to work on 2.4 GHz network or 5 GHz network band?
  2. What is the status of the wireless light on the printer, steady or blinking?

 

While you respond to that, try the below suggestions -

 

Press the wireless and cancel button for 3 seconds to restore the network.

 

Please try the steps below to connect your printer to the network.

 

-->On the printer control panel, press and hold the Wireless button and the Resume button together for three seconds. (When Wi-Fi Direct is turned on, the Wi-Fi Direct icon on the display stays on)  
--->On your computer or phone go to wifi and connect it to your printer 
--->Select your printer with DIRECT in the name from the list of available networks (example: DIRECT-74-HP Deskjet2600).
--->Select the Wi-Fi Direct printer signal in Wi-Fi settings 
--->If prompted for a password, type 12345678. This is the default password to log in.
--->Now open a browser and type 192.168.223.1
--->you will be able to access the printer's EWS page 
--->on the page, you will find network - click on it 
--->go to wireless and select wireless setup wizard
--->now select the network that you want your printer to connect to and type in the password 
--->the printer will have solid blue light if it's connected 
--->then connect your phone back to your network

 

Hope this helps! Keep me posted. 

 

And, Welcome to the HP Support Community. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation