-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Wireless, Networking & Internet
- I've been locked out of Wireless Setup Wizard.

Create an account on the HP Community to personalize your profile and ask a question
05-01-2024
01:19 PM
- last edited on
05-02-2024
11:44 AM
by
PalenoRafael
I've been locked out of the ability to change the wifi network and password. How do I change the settings so that I can access all features on my HP Officejet Pro 8600, Serial #: [edit].
05-02-2024 06:36 PM
Hi @KimW47,
Welcome to the HP Support Community.
Thank you for posting your query, I will be glad to assist you.
I see that you are facing an issue with connecting your Printer to the network.
Please follow the steps below to connect your printer to the network again.
1) Uninstall the HP smart app by click on this link, Restart the computer or mobile device to clear possible error conditions.
2) Enable Wi-Fi setup mode: When you turn on your printer for the first time, it is temporarily placed in Wi-Fi setup mode so that it can be discovered during setup. Use the printer control panel to restore Wi-Fi setup mode, and then set up the printer again. Go to Restore Wi-Fi setup mode on your HP printer for more information.
3) Refer to this link to use the HP smart app on your phone/tablet/PC to add a printer.
Note: Enable Bluetooth for an HP Smart app setup: Enable Bluetooth on your computer or mobile device so that HP Smart can detect the printer during the setup.
Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.
I hope this helps.
Take care and have a great day ahead!
Irwin6
HP Support
Irfan_06-Moderator
I am an HP Employee
05-08-2024 08:03 AM
Hi @KimW47,
I am sorry to hear that the above steps did not help much but i do appreciate your efforts in performing the troubleshooting steps.
I've sent you a private message with the instructions to perform a factory reset on your printer.
In order to access your private messages, Click the Private message icon on the upper right corner of your HP Community profile Next, to your profile Name, you should see a little blue envelope, please click on it or simply click on this link
Take care and have a great day ahead!
Irwin6
HP Support
Irfan_06-Moderator
I am an HP Employee