Lase Jet M1110w Encrypted wifi

[yve247]

my jet m1110w is not letting m eprint do to encrpted wifi??? same wifi i started with and i had able to print fine all of sudden its been encrypted i have password? is not in the any open wifi.. HELP !!

[Garp_senchau]

@yve247, Welcome to HP Support Community,

Thank you for posting your query; I’m here to help by guiding you through steps to resolve this issue

It sounds like your HP LaserJet M1110w is struggling to connect due to a WiFi encryption issue, even though it worked fine before. Since you still have the correct WiFi password and it's not on an open network, there are a few things you can try:

Power cycle your printer, router, and computer. Unplug them for 60 seconds, then turn them back on.

Remove the printer from your network settings and re-add it manually using the correct WiFi password. 

Your printer may not support newer security protocols (like WPA3). Try switching your router’s security settings to WPA2.

If all else fails, reset your printer’s network settings and set up the connection from scratch. You may refer these guides: Restore Wi-Fi setup mode on your HP printer | HP® Support

Reference: HP printer setup (Wi-Fi network) | HP® Support

Let me know what happens, and I’ll guide you further! 😊

Please feel free to reply here if you have any questions or if you need further clarification on any of the steps. 

Take care and have a good day. 

If my response helped, please mark it as an Accepted Solution! ✅ It helps others and spreads support. 💙 Also, tapping "Yes" on "Was this reply helpful?" makes a big difference! Thanks! 😊

Regards,