M31 printer can’t connect to new wireless network

[Helpless-printe]

New network. Can’t figure out how to connect M31 printer to new wireless network. 

[zoey7886]

@Helpless-printe, Welcome to the HP Support Community!  

Thanks for reaching out about your query regarding How to Connect Your HP LaserJet Pro MFP M28-M31 Printer to a New Wireless Network! 

We're thrilled to have the opportunity to assist you and provide a solution.  

To connect your HP LaserJet Pro MFP M31 printer to a new wireless network, you can use the Wi-Fi Protected Setup (WPS) method if your router supports it. Follow these steps:

Using Wi-Fi Protected Setup (WPS)

For printers with a Wireless button:

• Press and hold the Wireless button on your printer for three seconds until the wireless light blinks.

For printers with a control panel:

• Navigate to the Network Settings or Wireless Settings menu.
• Select Wi-Fi Protected Setup, then Push Button, and then Start.

On your router:

• Within two minutes, press and hold the WPS button on your router for three to five seconds until the WPS light blinks.

Wait for the connection:

• It can take a few minutes for the printer to establish a connection with the router.
• Once the wireless connection is established, the wireless light on your printer will stop blinking, or a message will appear on the control panel.  

Hope this helps! 

Take care, and have an amazing day!  

Did we resolve the issue? If yes, Please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!  

Regards,