My microsoft surface is no longer connecting with my HP officejet 8010e?

[Garrymck]

all of a sudden my microsoft surface is no longer connecting with my HP officejet 8010e printer?

[Irfan_06]

Hi @Garrymck,

Welcome to the HP Support Community.

Thank you for posting your query, I will be glad to assist you.

I understand you're experiencing an issue with your printer that is not connected to your Microsoft surface.

I apologize for any inconvenience this may have caused, I'm here to help you today.

Please follow the steps below to fix the issue.

A) Perform a power drain.

1) Take out the cartridges

2) Unplug the power cord from the printer & wall.

3) Press and hold the power button down for 15 seconds and release the power button, wait for about 30 seconds.

4) Plug the power cord back into the printer and wall, ensure the printer is plugged into the wall & not into a surge protector.

5) Insert the cartridges back into the printer.

Remove the cartridges > Unplug the power cord > Wait for 30 seconds > Plug the power cord back in > Insert the cartridges

B) Kindly refer to the steps on this link to update the printer firmware and let me know if that resolves the issue.

C) If the issue still persists, uninstall the printer software by following the steps from this link and restart the devices.

D) Install the printer software by clicking on the link again and let me know if that resolves the issue.

Note: Enable Bluetooth for an HP Smart app setup: Enable Bluetooth on your computer or mobile device so that HP Smart can detect the printer during the setup.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

I hope this helps.

Take care and have a good day

Irwin6

HP Support

[Garrymck]

Thank you Irwin, I've tried everything that you have suggested but my surface is showing a printer error message when I try to print something/

[Irfan_06 · Accepted solution]

Hi @Garrymck,

I am sorry to hear that the above steps did not help much but i do appreciate your efforts in performing the troubleshooting steps.

Please follow the steps below to connect your printer to the network again.

1) Uninstall the HP smart app by click on this link, Restart the computer or mobile device to clear possible error conditions.

2) Enable Wi-Fi setup mode: When you turn on your printer for the first time, it is temporarily placed in Wi-Fi setup mode so that it can be discovered during setup. Use the printer control panel to restore Wi-Fi setup mode, and then set up the printer again. Go to Restore Wi-Fi setup mode on your HP printer for more information.

3) Refer to this link to use the HP smart app on your phone/tablet/PC to add a printer.

Note: Enable Bluetooth for an HP Smart app setup: Enable Bluetooth on your computer or mobile device so that HP Smart can detect the printer during the setup.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

I hope this helps.

Take care and have a great day ahead!

Irwin6

HP Support

[Garrymck]

Thank you Irwin. I now have my printer back up and running!

[Irfan_06]

Hi @Garrymck,

That's great! Happy to hear that the issue has been resolved. I appreciate your efforts in performing the steps to fix it and If you need further assistance feel free to reach out to us.

Take care and have a great day ahead!

Irwin6

HP Support