No display on HP SMART 519

[Imyourumbrella]

Good day, i have an issue with my printer there are no display appearing. What can i do to fix this?

[A_Gayathri]

Hi @Imyourumbrella ,

Welcome to HP Support Community.  

Thank you for posting your query, I will be glad to help you.

If your HP Smart Tank 519 Wireless All-In-One printer is not displaying anything, you can try the following steps to troubleshoot the issue:

Check Power Connection:

• Make sure the printer is properly plugged into a working power outlet.
• Check the power cord for any damage, and replace it if necessary.

Power Cycle the Printer:

• Turn off the printer and unplug it from the power source.
• Wait for about 30 seconds, then plug it back in and turn it on.

Check for Jammed Paper:

• Open the printer cover and check for any jammed paper inside.
• Remove any stuck paper carefully.

Inspect for Obstructions:

• Ensure that there are no foreign objects or obstructions inside the printer that may be preventing proper operation.

Check for Error Lights or Codes:

• Look for any error lights or codes on the printer. Refer to the printer manual or user guide to interpret the error messages.

Update Firmware/Software:

• Visit the official HP website and check for any firmware or software updates for your printer model. If available, update the firmware.

Reset Printer:

• Perform a factory reset on the printer. Note that this will reset all settings to their default values. Refer to the printer manual for instructions on how to perform a reset.

I hope this helps. 

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Gaya1239

HP Support