Printer is offline after installing mesh system. Cannot connect wirelessly

[Figulus]

Recently installed a Deco mesh system and my printer will not connect wirelessly..I've tried everything to troubleshoot without success, I can print only via USB cable

[Rainbow23 · Accepted solution]

Hi @Figulus,

Welcome to the HP Support Community. 

Thank you for posting your query. I will be glad to help you.

I see that your HP Deskjet F4580 All-In-One Printer is not connecting to the wi-fi network after changing the network.

Please follow the steps listed below to connect using USB cable and then change it to wireless.

Step 1: Connect using USB cable:

Please follow the steps in this document to connect the printer using the USB cable.

Step 2: Change from a USB connection to wireless:

Please follow the steps in this document to change from a USB connection to a wireless network.

Let me know if this works.

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

[Figulus]

Thanks. so far the WiFi  connection was not re-established, but at least I can now print via USB cable for the first time on my W11 laptop. As such you achieved what both the tech assistants on the phone, for whom I paid a £21.49 fee, could not. They just wanted me to 'upgrade' my perfectly good printer... However I'm now frightened to adopt the procedure for re-connecting to the WiFi in case it wrecks the USB connection....?

[Figulus]

Thanks. so far the WiFi  connection was not re-established, but at least I can now print via USB cable for the first time on my W11 laptop. As such you achieved what both the tech assistants on the phone, for whom I paid a £21.49 fee, could not. They just wanted me to 'upgrade' my perfectly good printer... However I'm now frightened to adopt the procedure for re-connecting to the WiFi in case it wrecks the USB connection....?

[Rainbow23]

Hi @Figulus,

You are welcome.

Do keep us posted if you need help in the future and we will always be there to help you.

Take care and have a good day!

Please click “Accept as Solution” on my public post to give us some reinforcement. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping.