Printer keeps saying complete set up

[TinaRich]

My printer disconnected itself a while ago. Each time I go through every way to connect (no reason why it should not work) it says complete set up. I don't know what more I can do. I have had the printer for 3 years and until 4 months ago, no problem.

[Irfan_06]

Hi @TinaRich,

Welcome to the HP Support Community.

Thank you for posting your query, I will be glad to assist you.

I understand you're experiencing an issue with connecting your Printer that has an error message.

I apologize for any inconvenience this may have caused, I'm here to help you today.

Please follow the steps below to fix the issue.

A) Perform a power drain.

1) Take out the cartridges

2) Unplug the power cord from the printer & wall.

3) Press and hold the power button down for 15 seconds and release the power button, wait for about 30 seconds.

4) Plug the power cord back into the printer and wall, ensure the printer is plugged into the wall & not into a surge protector.

5) Insert the cartridges back into the printer.

Remove the cartridges > Unplug the power cord > Wait for 30 seconds > Plug the power cord back in > Insert the cartridges

B) Kindly refer to the steps on this link to update the printer firmware and let me know if that resolves the issue.

C) If the issue still persists, please follow the steps below to connect your printer to the network again.

1) Uninstall the HP smart app by click on this link, Restart the computer or mobile device to clear possible error conditions.

2) Enable Wi-Fi setup mode: When you turn on your printer for the first time, it is temporarily placed in Wi-Fi setup mode so that it can be discovered during setup. Use the printer control panel to restore Wi-Fi setup mode, and then set up the printer again. Go to Restore Wi-Fi setup mode on your HP printer for more information.

3) Refer to this link to use the HP smart app on your phone/tablet/PC to add a printer.

Note: Enable Bluetooth for an HP Smart app setup: Enable Bluetooth on your computer or mobile device so that HP Smart can detect the printer during the setup.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

I hope this helps.

Take care and have a great day ahead!

Irwin6

HP Support