• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about printers, Click here to check it out!
Common problems for Connectivity Issues
We would like to share some of the most frequently asked questions about Printer Wi-Fi, Connectivity Issues and Offline Status. Check out this link: HP printer is offline or unavailable.
HP Recommended
HP Envy 7255e Inspire All-in-One Printer

My print is always off line. I reset everything. It print one or two pages and goes to offline . Printer less than month old . Configuration page say ready? Any one one have any answers. Ore same problem. Hp7255e

thanks

 

1 REPLY 1
HP Recommended

Hi @Pr1922,

 

Welcome to the HP Support Community

 

I understand you are facing a connectivity issue with your HP Envy 7255e All-In-One Printer. Not to worry I will help you to get a resolution to resolve the issue.

 

To assist you better:

  • Is the blue Wi-Fi light solid on the printer? ( if the Wi-Fi Light is blinking then please re-connect the printer back to your Wi-Fi router - Restore Wi-Fi setup mode on your HP printer, Once you restore the network to defaults, then please follow the instructions on this link to connect the printer back to your PC.)
  • How far is the printer located from the WiFi router?
  • Do you have a dual-band router?
  • If you have a Dual-band router and both 2.4GHz and 5GHz networks share the same name/SSID, the printer will not be able to connect to the network. In this case, contact your Internet service provider to assign different names to both networks.
  • Which operating system is running on your device and what is it's current version?

While you respond to that, Let's perform a power drain: 

  • With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
  • Remove USB cable, if present.
  • Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
  • Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
  • Turn on the printer and wait till warm-up period finishes and the printer is idle

Update the printer firmware 

 

  • Click here to download and install the latest printer firmware from your product
  • Click here to know different methods of updating printer firmware.

If the issue persists, then please follow the steps mentioned in this document: HP printer is offline or not responding

 

Hope this helps! Keep me posted. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Yes" on the bottom right to say “Thanks” for helping


ANAND_ANDY
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.