Stuck offline

[VCGx]

I am not able to get my officejet pro 8620 recognised by my desk top despite working well for year. I have tried deleting and reloading the driver but it will not show in the device manager or connect.

[Jay_G24]

Hi @VCGx,

Welcome to the HP Support Community

I'd like to help!

I understand you are unable to add the printer to your computer.

Let's try and uninstall the printer software from the root level on your PC and install the full feature printer software.

First, unplug the USB cable from the printer if present.

• Go to Control panel – Programs and feature – Select all the HP printer entries and uninstall them.
  • Now go to Control panel – Devices and printer – Select all the printer entries and remove the device.
  • Restart your computer.
  • Click the bottom-left Start button on desktop, type device manager in the search box and tap Device Manager on the menu.
  • Once in device manager, click on the view tab in the top & choose “Show hidden devices”.
  • Then from the device manager list, check the entries under “Printer” – If there are any entries, please right click and choose “uninstall” – In the confirm device un-install pop-up, make sure you select the box which says “Delete the driver software for this device". 
  • Also, check the entries under "printer queue" and "imaging devices" and repeat the same exercise. Delete any printer entry or any entry which says “Unknown device”.
  • Once done, close device-manger. Then press the "windows key" + "r" to get the "Run" window open - Type "printui.exe /s" and press enter.
  • Under print server properties, go to drivers - remove any entry there as well.
  • Again, go running window, type – “c:/programdata” – Go to Hewlett Packard folder, remove any printer related folders & files.
  • Once done you can try cleaning out your temporary files and cached files. You can try using automated applications like some cleaner software's that you can download from the internet.
  • Now restart your computer again.
  • Open the Run window again, type “services.msc” and press ok to get services window.
  • Scroll down to “Remote Procedure Call (RPC)” – right-click and go to properties. Make sure the service is started and startup type is “Automatic”.
  • Now scroll up and go to “Function Discovery Provider Host” – right-click and select properties – Change the startup type to “manual” and start the service.
  • Repeat the same exercise on “Function Discovery Resource Publication” as well
  • Windows image acquisition stop and restart the service 

Install all the available Windows updates

If it is been a while since you updated your Windows, that is the main reason why Windows says your HP printer driver is unavailable. Here are the steps how to do a Windows Update to install all accessible operating system update.

If you are accessing Windows 10, then these steps are for you.

1. Hit the Start menu and write an update. After that, click on the “Check for updates” option.
2. Tap on the “Check for updates” option.
3. After clicking on that option, Windows will install the updates automatically.
4. When Windows completes all its updates, start your computer again and attempt to print a file to check if your printer works.

Reinstall the drivers from the Software and drivers page

If the error persists, Try installing the printer with windows built-in driver

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Yes" on the bottom right to say “Thanks” for helping

[VCGx]

Hi,

still the same. The only thing I couldn’t do was the ‘Print Server Properties’ it wouldn’t let me delete the HP8620 as it said it was in use so I switched it off and tried again, just the same!

I can Air Print from my iPhone an iPad and in the available wireless connections it shows the printer but the desktop cannot find it no matter what I try!

it has been working fine for the last couple of years until now!
Rgds,

[Jay_G24]

Try the below suggestions -

 Use HP Print and Scan Doctor to check connectivity

Download a special version of HP Print and Scan Doctor specifically created to help with printer offline conditions.

1. Download HP Print and Scan Doctor.
2. Run HPPSdr.exe from the download location on your computer.
3. Once HP Print and Scan Doctor opens, click Start, and then select your printer.
   • If your printer in not in the list, turn it off and on, and then click Retry.
   • If there is a connection problem, follow the instructions in HP Print and Scan Doctor.
4. If a screen prompts you to turn on printer updates, click Yes.
5. If a screen prompts you to make your printer the default printer, click Yes.

Set a manual IP-

To set a manual IP and try the steps below -

--->Touch on the wifi icon ((i)) on the printer, and take down the IP address 

--->Open a web browser (ex Chrome or Mozilla) and type in the printer's IP

--->then go to network ---> general ---> network protocols ---> select IPV4 only-->apply 

--->go to wireless ---> wireless 802.11---> select manual ip ---> apply

--->Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.  

--->then go to settings on the main ews page --> power management ---> select sleep mode to max 15min

 Connect the printer to TCP/IP port

 --->Touch on the wifi icon ((i)) on the printer, and take down the IP address 

a. Click Start/Devices and Printers.  Right-click on your HP Printer.  Select Printer Properties.  Select the Ports tab at the top.

b.    Select Add Port.  Select Standard TCP/IP Port.  Select New Port.

c.    Follow the Add Port Wizard.  Under Printer Name or IP Address, .  Example:  192.168.1.15.  The IP address will be copied under Port Name.  

d.    Select Next and Finish the Wizard.

Let me know how this goes!

[VCGx]

Morning,

Scan Doctor does nothing but show the printer off-line and won’t let me change anything. If I need to print anything I have to email myself and air print from my phone which I no good and extremely inconvenient! I am at the point that I have to look at another manufacturer as I need a solution.

Rgds,

[Jay_G24]

Were you able to set a manual IP and add the printer using a TCP/IP port?

Let me know!