WPS Number

[Helen203]

I need the WPS number, it doesnt work when i do I & wifi button

[Kuroi_Kenshi]

Hi @Helen203,

Welcome to the HP Support Community! 

Thanks for reaching out about your query regarding connecting the HP DeskJet 4220e All-in-One Printer to a wireless network using Wi-Fi Protected Setup (WPS)!

We're thrilled to have the opportunity to assist you and provide a solution.

Try these steps:

Push Button Method:

1. Ensure your wireless router supports WPS and is powered on.
2. Press the WPS button on your wireless router.
3. On your printer, press and hold the Wireless button until the wireless light starts blinking. This typically takes about three seconds.
4. The product will begin a timer for approximately two minutes during which the corresponding button on the networking device needs to be pressed.
5. Once the connection is established, your device will be connected to the network.

PIN Method:

1. Press the Wireless button on your printer to display the Wireless menu.
2. Select WiFi Protected Setup from the printer display.
3. Choose PIN Setup.
4. The printer display will show a PIN. Enter this PIN on your wireless router or other networking device.
5. Follow any on-screen prompts to complete the setup if necessary.

I hope this helps.

I'm glad I could help! 😊 If this resolved your issue, please mark it as "Accepted Solution" and click "Yes" on "Was this reply helpful?" Your feedback not only keeps us going but also helps others find the solution faster! 👍✨

Take care and have an amazing day ahead! 🚀

Best regards,