• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about printers, Click here to check it out!
Common problems for Connectivity Issues
We would like to share some of the most frequently asked questions about Printer Wi-Fi, Connectivity Issues and Offline Status. Check out this link: HP printer is offline or unavailable.
HP Recommended
HP ENVY 6052 All-In-One Printer
Microsoft Windows 10 (32-bit)

I performed a WIRELESS NETWORK Test And received the Following Test Results: ATTENTION: The wireless radio on my HP printer is currently turned OFF.....Where on my HP Envy Series 6052 All In One Printer do I find the Wireless Radio so I can turn it on? That would connect wireless Network and therefore solve my problem.......By the way  I use Spectrum Internet  Wireless Network (No Router) on my Windows 10 PC Laptop and it was connected to my HP Envy Series 6052 All In One Printer .

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Hi,

At the back of the printer you have a small wireless button below the power button.

 

Shortly press the wireless button to turn its radio on, allow it a minute and then check foe any difference, you should see a solid wireless light if there are no other problems, if it keeps blinking after a minute let’s print an additional wireless test report and let me know its results, as well be sure to clarify what is the Network Name listed within the Network Configuration section:

https://support.hp.com/hr-en/document/c06543173

Shlomi



Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂

View solution in original post

1 REPLY 1
HP Recommended

Hi,

At the back of the printer you have a small wireless button below the power button.

 

Shortly press the wireless button to turn its radio on, allow it a minute and then check foe any difference, you should see a solid wireless light if there are no other problems, if it keeps blinking after a minute let’s print an additional wireless test report and let me know its results, as well be sure to clarify what is the Network Name listed within the Network Configuration section:

https://support.hp.com/hr-en/document/c06543173

Shlomi



Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.